Nogawa Chemical Dia Bond 888, 1 box (12 pieces)

Dia-Bond No. 888 Commercial Size 180ml Strong Adhesive for Rubber Shoes and Leather with Brush, Yellowish-Brown, Nogawa Chemical

Special price of 15,000 for a set of two boxes.

*Instructions for Use*
1. Thoroughly wipe off any dirt or oil from the surfaces to be bonded and ensure they are dry.
2. Lightly sand the surfaces to be bonded.
3. Apply evenly and thinly to both surfaces to be bonded. For materials that absorb easily, apply 2-3 coats.
4. Touch the adhesive-coated surface with your finger. Allow it to dry until it is no longer sticky to the touch.
5. After joining the surfaces, apply pressure by hand, or if necessary, with a roller or hammer, to ensure sufficient adhesion.

We receive many inquiries about shoe repairs.

*   Separated soles
*   Separated insoles
*   Separated toe areas
*   And more

While adhesives from various manufacturers can provide a good bond, the most reliable one we can recommend is:

Nogawa Chemical Dia-Bond No. 888, 180ml

Nogawa Chemical is the company name, and Dia-Bond is the product name. No. 888 is the product number.

With over 50 years of proven performance in shoe adhesives, it is ideal for most leather shoes!

However, please note that it will not adhere to vinyl chloride resin, PP (polypropylene), or PE (polyethylene). Please check the material.

For rubber and leather products, try Dia-Bond No. 888 first!

Two important points to remember:
☆ Apply adhesive to both surfaces, allow to dry thoroughly, and then bond!
☆ After bonding, apply sufficient pressure with clamps or similar tools!

These two points are crucial, especially the pressure application.