PS3 Early Models CECHA00, B00, etc. YLOD Easy Fix Repair Parts 2 pcs

If you wish to purchase this with the CELL or RSX slicer, it will be an additional 1000 yen (600 yen if you wish for only one of them).

We strongly recommend this as we are installing it during disassembly and repair.
Please refer to the product page for details on the PS3 slicer.

If you purchase 3 sets (2 sheets per set) or more, we will include the slicer (RSX, CELL) above for free.

This is a replacement board for YLOD repair called the PS3 Tantalizer, developed by a famous overseas YouTuber. This is the latest version, PS3 Tantalizer 0.9b.

- It is designed to replace the NEC/TOKIN power supply capacitors used in some PlayStation 3 models. There is no need to shave the board or install it at an angle (which is difficult). Simply place the repair parts as shown in the photo and lightly solder the contact parts.

- The board is equipped with 6 MLCC ceramic capacitors of size 0805 and 3 conductive polymer aluminum electrolytic capacitors of size 7343.

- The 7343 capacitor must be 2.5V/470UF or higher.
The configuration of the 0805 MLCC is as follows:
47UF / 22UF / 10UF / 4.7UF / 2.2UF / 1UF
- With the above combination, it delivers performance equal to or greater than the original NEC/TOKIN power supply capacitors.

NEC/TOKIN power supply capacitor capacity: approx. 1200uf per unit
This product's capacity (shown in photo) is approx. 1400uf, which is approximately equivalent to one unit.
ESR value is approx. 14mΩ.

- You are free to cut the outer, grooved part of the board. We also have a pre-cut version available separately, so please consider that as well.

This part does not guarantee a fix for YLOD. There are various causes for YLOD, and it is said that approximately 80% are caused by the degradation of NEC Tokin. We recommend doing a Google search before purchasing. Please also visit the product website.

- Due to manual implementation, the finish is not as neat as machine implementation, and some parts may be slightly angled, but this does not affect operation. The product has been tested for operation with a tester after completion.